HPE FlexNetwork 5140 24G SFP (16GSFP + 8SFP dualports (BASE-T RJ45 or 100/1000BASE-X)) EI Switch JL826A RENEW

Popis produktu:

HPE FlexNetwork 5140 24G SFP (16GSFP + 8SFP dualports (BASE-T RJ45 or 100/1000BASE-X)) EI Switch JL826A RENEW

HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A)

I/O ports and slots
16 SFP 100/1000 Mbps ports
8 SFP dual-personality ports - 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports
4 SFP+ fixed 1000/10000 SFP+ ports

Additional ports and slots
1 RJ-45 serial console port

Power supplies
2 power supply slots

1 minimum power supply required (ordered separately)

Physical characteristics
Dimensions
17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)

Weight
13.23 lb (6kg)

Memory and processor
512 MB SDRAM, 256 MB flash;

Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately)

Performance
IPv6 Ready Certified

1000 Mb Latency
< 5 µs

10 Gbps Latency
< 3 µs

Throughput
95 Mpps

Routing/Switching capacity
128 Gbps

Routing table size
1024 entries

MAC address table size
16384 entries

Environment

Operating temperature
23°F to 113°F (-5°C to 45°C)

Operating relative humidity
10% to 90%, noncondensing

Non-operating/Storage temperature
-40°F to 158°F (-40°C to 70°C)

Non-operating/Storage relative humidity
5% to 95%, noncondensing

Acoustic
Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779

Electrical characteristics

Frequency
50/60 Hz

Maximum heat dissipation
102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max.

Voltage
100 - 240 VAC
-48 to -60 VDC

Current
5 A

Maximum power rating
60 W

Idle power
30 W

Notes:
- Idle power is the actual power consumption of the device with no ports connected.
- Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
- Power Ratings for AC Power Supply indicated above.
- For DC input power, Idle Power is 38W and Max is 68W.
- DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply.

Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance

Emissions
FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993

Immunity
Generic
EN 55024
ESD
EN300 386

Management

IMC - Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager