Zyxel LTE7460, Outdoor LTE IAD, LTE CAT6 (300Mbps), PoE, Bridge/Router mode, IP65

Outdoor LTE IAD, LTE CAT6 (300Mbps), PoE,  Bridge/Router mode, IP65

The Zyxel LTE7460-M608 4G LTE-A Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP65 outdoor hardware designed for harsh environments. No matter you have a router device or not, the LTE7460-M608 can be easily deployed and integrated into your existing environment. You can set LTE as your main connection or use LTE as a backup when performance of the main connection drops. The LTE7460-M608 is good for any venue like suburban areas, public locations, homes and offices. Enjoy LTE technology with minimum effort with the LTE7460-M608.

State-of-the-art technology
The Zyxel LTE7460-M608 4G LTE-A Outdoor Router employs 3GPP Release 10, Category 6 – the best-practice LTE technology with 300/50 Mbps (DL/UL) data rates through carrier aggregation approbation. It also supports 3G/2G networks with the up-to- date “Dual Carrier HSPA+ (DC-HSPA+)” technology with 42/5.76 Mbps (DL/UL) data rates. You can enjoy ultra-fast, flexible wireless connection anywhere within the LTE/3G/2G signal coverage.

Embedded bridge/router mode adapts to all kinds of devices/gateways
For better network integration, Zyxel embeds both bridge and router modes into the LTE7460-M608. While users can take advantage of the built-in routing functions in all typical applications, the bridge mode is designed to work with users’ existing or preferred devices such as high-end Wi-Fi Access Points, Small Business Gateways or Enterprise Gateways. With the two built-in modes, the Zyxel LTE7460-M608 can be easily integrated with all kinds of devices/gateways.

Built-In multi-band antenna
Zyxel’s LTE7460-M608 4G LTE-A Outdoor Router provides multi-band embedded antennas of up to 7 dBi that work effectively in outdoor environments. The outdoor-friendly design makes it possible to work in near non-line-of-sight conditions where desirable signal strength was difficult to achieve.

Software upgrades over-the-air
Through the LTE radio interface, the Zyxel LTE7460-M608 supports TR-069 has full over-the-air configuration and software upgrade capability through events triggered by the operators.

Non-stop connectivity with LTE 2nd WAN for fail-over
Multi-WAN fail-over relieves the risk of network outage caused by dependence on single-WAN technology. Even better, LTE is wireless so you can get the second WAN without an additional cabling plan. As long as the gateway supports “multi-WAN fail-over”, you can just connect the Zyxel LTE7460-M608 to the existing gateway and set LTE as the fail-over WAN.

IP Networking

Support IPv4/IPv6 dual stack (NDP IPv6)
DHCP Server
ICMP supported
Bridge/Router mode supported
Virtual Private Network (VPN) pass through
Network Address Translation (NAT) Traversal

Support NAT/NAPT
Support DMZ
Support port forwarding
Support ALG
Support DDNS
IP Firewall

DoS Attack Prevention
Support SPI
Application-Level Firewall (LAN to WAN such as FTP, HTTP, Telnet, Ping)
Management

Support Local/Remote Web management and web online firmware upgrade
Support TR069 and TR069 remote firmware upgrade
SMS management
APN/PIN management
PIN/PUK management
Network selection
Network preference
Operating frequency band selection (support Cat 4 only)

LTE Interface
Standard compliant: 3GPP Release 10 Category 6
Supported frequency:
Band LTE 1/3/7/8/20/38/40
LTE TDD 2300/2600 MHz
LTE FDD 2600/2100/1800/900/800 MHz
Carrier aggregation configuration:
B1+B1, B1+B8, B1+B20
B3+B3, B3+B7, B3+B8, B3+B20
B7+B7, B7+B8, B7+B20
B38+B38, B40+B40
FDD LTE peak data rate:
300 Mbps DL within 40 MHz bandwidth (CA)
50 Mbps UL within 20 MHz bandwidth
TDD LTE peak data rate:
224 Mbps DL within 40 MHz bandwidth (CA)
10 Mbps UL within 20 MHz bandwidth)

UMTS/EDGE/GPRS/GSM Air Interface
Standard compliant: WCDMA Rel’99 and Rel’10 DC-HSPA+; GSM/GPRS/EGPRS Rel’99

Supported frequency:
UMTS band 1/8
EDGE/GPRS/GSM band 2/3/5/8
DC-HSPA+ downlink data rate up to 42 Mbps
HSUPA uplink data rate up to 5.76 Mbps
UMTS data rate up to 384 kbps
EDGE data rate up to 236.8 kbps
GPRS data rate up to 85.6 kbps

Antennas
2 embedded antennas of up to 7 dBi

Power Specifications
Standard 802.3 af power over Ethernet
Power consumption at jack: < 10 W

Physical Specifications
Dimensions (WxDxH): 254 x 255 x 58 mm
Weight: 1.1 kg
The mounting kits

Environmental Specifications
IP65 Enclosures

Operating Environment

Temperature: -40°C to 60°C (-40°F to 140°F)
Humidity: 5% to 95% (Non-condensing)
Storage Environment

Temperature: -40°C to 70°C (-40°F to 158°F)
Humidity: 5% to 95% (Non-condensing)