DIMM DDR3 16GB 1600MHz CL11 (KIT 2x8GB) 512x8 ADATA, retail

Parametry
Typ paměťového modulu pro základní desky DDR3
Kapacita paměti 16 GB
Frekvence paměťového modulu (v MHz) 1600
Korekce chyb (ECC) Ne
CAS latency 11

This is a 1024Mx64 bits 8GB(8192MB) DDR3-1600(CL11)-11-11-28 SDRAM memory module,
The SPD is programmed to JEDEC standard latency 1600Mbps timing of 11-11-11-28 at 1.5V.
The module is composed of six-teen 512Mx8 bits CMOS DDR3 SDRAMs in FBGA package
and one 2Kbit EEPROM in 8pin TDFN package on a 240pin glass–epoxy printed circuit board.
The module is a Dual In-line Memory Module and intended for mounting onto 240-pins edge connector sockets.
Synchronous design allows precise cycle control with the use of system clock.
Data I/O transactions are possible on both edges of DQS. Range of operating frequencies,
programmable latencies and burst lengths allow the same device to be useful for
a variety of high bandwidth, high performance memory system applications.

Features:
- Power supply (Normal): VDD & VDDQ = 1.5V ± 0.075V
- 1.5V (SSTL_15 compatible) I/O
- MRS Cycle with address key programs
- CAS Latency (5,6,7,8,9,10,11)
- Burst Length (BL):8 and 4 with Burst Chop(BC)
- Bi-directional, differential data strobe (DQS and /DQS)
- Differential clock input (CK, /CK) operation
- DLL aligns DQ and DQS transition with CK transition
- Double-data-rate architecture; two data transfers per clock cycle
- 8 independent internal bank
- Internal (self) calibration: Internal self calibration through ZQ pin (RZQ:240 ohm±1%)
- Auto refresh and self refresh
- Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE 95°C
- 8-bit pre-fetch.
- On Die Termination using ODT pin.
- Lead-free and Halogen-free products are RoHS Compliant