Network Manag. Card With Environmental Monitoring and Modem

Nefunguje s SMT a SMX modely!

Network Management Cards provide standards-based monitoring, configuration, control, and event handling for APC UPSs, and PowerChute remote shutdown for systems over a 10/100BaseT network.
The new modules are integrated onto a single UPS SmartSlot card and have features like a built in modem for dial in, out of band management and environmental management capabilities for infrastructure management.

On-board, pre-configured modem
Two User-definable Alarm Inputs
One relay contact output
Temperature/Humidity Probe Connector

9-pin connector
• Output relay (Output): Normally closed (NC), common (COM), and normally open (NO) pins used by the Integrated Environmental Monitor’s output relay at an AP9618 or AP9619 Management Card.
• Power (Pwr): Normally-open ground (GND NO) and +12VDC pins.
• Input contacts (Zone 1 and 2): Two sets of normally closed (NC) and common (COM) pins used by the Integrated Environmental Monitor at an AP9618 or AP9619 Management Card.

Probe connector
Connects a Temperature/Humidity probe to the IEM at the AP9618 or AP9619 Management Card.

Modem connector
Connects the internal analog modem at an AP9618 Management Card to an analog phone line to provide for out-of-band communications.