SONY projektor VPL-VW290/B

Technické parametry

   Svítivost (v ANSI lumenech): 1500
   Technologie projektoru: LCD
   Skutečné rozlišení projektoru: UHD (3840x2160)
   Životnost lampy (v hodinách): 6 000
   Rozhraní: HDMI
   Rozhraní: USB 2.0
   Rozhraní: 3.5mm Jack
   Rozhraní: LAN
   Rozhraní: RS-232
   Výbava: 3D
   Výbava: Dálkové ovládání
   Výbava: Zoom
   Uchycení: Na strop
   Uchycení: Na stůl




Technické údaje

Display System
Display System: 4K SXRD panel, projection system
Size of effective display area: 0.74” x 3
Number of pixels: 26,542,080 (4096 x 2160 x 3) pixels
Focus: Powered
Zoom: Powered (Approx. x 2.06)
Lens shift: Powered
Vertical: +85% -80% Horizontal: +/-31%
Throw ratio: *11.38 : 1 to 2.83 : 1
Light source: High-pressure mercury lamp, 225 W type
Recommended lamp replacement time*: 26,000 H (Lamp mode: Low)
Screen size: 60” to 300” (1,524 mm to 7,620 mm)
Light output: 1,500 lm (Lamp mode: High)
Colour light output: 1,500 lm (Lamp mode: High)
Accepted digital signals: 720x576/50p, 720x480/60p, 1280x720/50p, 1280x720/60p, 1920x1080/50i, 1920x1080/60i, 1920x1080/24p, 1920x1080/50p, 1920x1080/60p, 3840 x 2160/24p, 3840 x 2160/25p, 3840 x 2160/30p, 3840x2160/50p, 3840x2160/60p, 4096 x 2160/24p, 4096 x 2160/25p, 4096 x 2160/30p, 4096x2160/50p, 4096x2160/60p,
OSD language: 18-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Arabic, Polish)
HDMI: x 2 (HDCP2.2)
Trigger: x 1 (Mini jack, DC 12 V, Max. 100 mA)
RS-232C: x1 (D-sub 9-pin (male)), LANx1 (RJ-45, 10BASE-T/100BASE-TX), IR IN / OUTIN: x 1 (Mini jack), USBx 1 (Type A, DC 5 V, Max. 500 mA)
Picture processor: X1 for projector
Acoustic Noise: 426 dB
Operating temperature / Operating humidity: 5°C to 35°C (41°F to 95°F) / 35% to 85% (no condensation)
Storage temperature / Storage humidity: -20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)
Power Requirements: AC 100-240 V, 50/60 Hz
Power Consumption: 390 W
Standby: 0.4 W (when "Remote Start" is set to "Off")
Networked Standby: 1.0 W (LAN) (when "Remote Start" is set to "On")
When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W)
Standby Mode / Networked Standby Mode Activated: After about 10 Minutes
3D capability: Yes
3D emitter: Built-in RD emitter
Dimensions (Without Protrusions): W 496 x H 205 x D 464 mm (W 19 1/2 x H 8 3/32 x D 18 1/4 in)
Mass: Approx. 14 kg / 31 lb
Supplied Accessories: RM-PJ28 Remote Commander (1), Size AA (R6) Manganese Batteries (2), AC Power Cord (1), Lens Cap (1), Quick Reference Manual (1),Safety Regulations (1)
Optional AccessoriesLMP-H220 (Lamp)