SUPERMICRO 1U Intel HFI 48port QSFP28 100G switch

 Port Attributes:
- 48x 100 Gb/s ports - QSFP28
- RJ45 1G optional management port
- USB serial console port

Switching:
- Switching capacity 9.6 Tb/s total fabric bandwidth
- Optimized high message rate
- Optimized error detection/correction and low latency
- Capability of 27,648 nodes in 2-tier configuration
- Virtual lanes: Configurable from one to eight VLs
   plus one management VL
- Configurable MTU size of 2 KB, 4 KB, 8 KB, or 10KB
- Maximum multicast table size: 8192 entries
- Maximum unicast table size: 49151 entries
- Passive copper or active fiber cables

Management:
- Out-of-band management card (optional)
- Built-in Fabric Manager
- Subnet Management Agent (SMA)
- Performance Management Agent (PMA)
- Enables Command Line Interface and Chassis
   Management GUI through 10/100/1000 Base-T
   Ethernet
- Enables Serial Console through USB Serial Port
- Supports Embedded Subnet Manager (ESM) and
   Performance Manager (PM)
- Enables Network Time Protocol (NTP),
   SNMP/MIBs, and LDAP
- FastFabric Toolset
- Fabric Management GUI

Dimensions:
- 17.2" W x 16.6" D x 1.72" H

Weight:
- 16 lbs / 7.26 kg

Power:
- Redundant hot-pluggable 750W power supplies
- AC Input: 100-127V/200-240 V, 50-60 Hz
- Power consumption (Typical/Max):
   189/238 W (Copper)
   356/408 (All max 3W Optical)

Operating Temperature:
- 0°C to 40°C (32°F to 104°F)