SUPERMICRO Quad port 10Gb SFP+ PCI-E x8 XL710-AM1

General
–
Intel® XL710-AM1 controller
–
Low Profile Standard form factor
–
PCI-E 3.0 x8 (8GT/s) interface
–
Quad SFP+ connectors with speed up to 10Gbps per port
–
Load balancing on multiple CPUs
–
Intel® PROSet Utility for Windows Device Manager
–
Time Sync (IEEE 1588)
–
Energy Efficient Ethernet (EEE)
•
I/O Features
–
Intel® Flow Director
–
MSI-X support
–
Multiple Queues: 1,536 TX and RX queues per port
–
Tx/Rx IP, SCTP, TCP, and UDP checksum offloading (IPv4, IPv6) capabilities
–
Jumbo Frame (9.5KB)
•
Virtualization Features
–
Next-Generation VMDq with up to 256 VMDq VMs supported
–
PCI-SIG SR-IOV with up to 128 virtual ports
–
Virtual Machine Load Balancing (VMLB)
–
Advanced Packet Filtering
–
VLAN support for up to 4096 VLAN tags
–
VXLAN and NVGRE support
•
Storage Interface Features
–
Preboot eXecution Environment (PXE) support
–
iSCSI remote boot
–
Fibre Channel over Ethernet (FCoE)
–
Simple Network Management Protocol (SNMP) and Remote Network
Monitoring (RMON) static counters
•
Management Features
–
Asset Management support on Supermicro® X10 generation platforms
–
Controller asset tags such as part number, revision, serial number, and MAC
addresses
–
Controller thermal sensor
•
Advanced Software Features
–
Teaming support
–
IEEE 802.3ad (link aggregation control protocol)
–
IEEE 802.1Q VLANs
–
IEEE 802.3 2005 flow control support
–
IEEE 802.1p
–
TCP segmentation/large send offload
–
Interrupt moderation
•
OS Support
–
Windows® Server 2012 R2, 2012, 2008 R2 X86-64
–
Linux RedHat EL 6.5 and 7.0 IA-32, X86-64, and IA-64
–
Linux SuSE SLES 11 SP3 and 12 IA-32, X86-64, and IA-64
–
FreeBSD 9 and 10 IA-32, X86-64, and IA-64
–
UEFI 2.1 and 2.3 X86-64 and I-64
–
VMware ESXi 5.1 and ESXi 5.5 X86-64
•
Cable Support
–
SFP+ direct attach twinaxial copper cables up to 7m
–
Fiber-optic cables (with required optional SFP+ transceivers)
•
Power Consumption
–
Typical power consumption: 4W
–
Maximum power consumption: 8W
•
Operating Conditions
–
Operating temperature: 0°C to 55°C (32°F to 131°F)
–
Storage temperature: -40°C to 70°C (-40°F to 158°F)
–
Storage humidity: 90% non-condensing relative humidity at 35°C
•
Physical Dimensions
–
Card PCB dimensions: 14.99cm (5.9in) x 6.90cm (2.73in) (L x H)
–
Height of end brackets: standard – 12cm (4.725in), low-profile – 7.94cm
(3.13in)
•
Optional Accessories:
–
AOC-E10GSFPSR: SFP+ transceiver module for short range fiber cables (up
to 300m)
–
AOC-E10GSFPLR: SFP+ transceiver module for long range fiber cables (up to
3000m)
–
AOC-TSR-FS: SFP+ transceiver module for short range fiber cables (up to
300m)
–
CBL-0347L: 39.37” (100cm) 10GbE SFP+ to SFP+, Twinaxial copper cable
–
CBL-0348L: 118.11” (300cm) 10GbE SFP+ to SFP+, Twinaxial copper cable
–
CBL-0349L: 196.85” (500cm) 10GbE SFP+ to SFP+, Twinaxial copper cable