Emulex LightPulse Single port 8Gb FC PCI-E x8 LP HBA

Standards

   ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
   PCI Express base spec 2.0
   PCI Express card electromechanical spec 2.0
   Fibre Channel class 2 and 3
   PHP hot plug-hot swap

Architecture

   Single-channel
   8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected
   Integrated data buffer and code space memory

Comprehensive OS Support

   Windows, Linux, NetWare, Solaris, VMware
   Additional support is available from OEMs and partners

Hardware Environments

   PowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor family

Optical

   Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
   Optics: Short wave lasers with LC type connector
   Cable: Operating at 8Gb/s
       50/125 microns (500MHz*km BW)-up to 50m
       50/125 microns (2000MHz*km BW)-up to 150m

Physical Dimensions

   Short, low profile MD2 form factor card
   167.64mm x 68.91mm (6.60" x 2.71")
   Standard bracket (low profile available)

Power & Environmental Requirements

   Volts: +3.3, +12
   Operating temperature: 0° to 55°C (32° to 131°F)
   Storage temperature: -40° to 70°C (-40° to 158°F)
   Relative humidity: 5% to 95% non-condensing
   23 degree C wet bulb