Emulex LightPulse Single port 8Gb FC PCI-E x8 LP HBA

Standards

   ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1
   PCI Express base spec 2.0
   PCI Express card electromechanical spec 2.0
   Fibre Channel class 2 and 3
   PHP hot plug-hot swap

Architecture

   Dual-channel
   8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected
   Integrated data buffer and code space memory

Comprehensive OS Support

   Windows, Linux, NetWare, Solaris, VMware
   Additional support is available from OEMs and partners

Hardware Environments

   PowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor family

Optical

   Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)
   Optics: Short wave lasers with LC type connector
   Long wave model - LPe12002-X8:
       Long wave optics allows board to transmit signal up to 1.4Km using 800-SM-LC-I or up to 10km when using 800-SM-LC-L.
   Cable: Operating at 8Gb/s
       50/125 microns (500MHz*km BW)-up to 50m
       50/125 microns (2000MHz*km BW)-up to 150m

Physical Dimensions

   Short, low profile MD2 form factor card
   167.64mm x 68.91mm (6.60" x 2.71")
   Standard bracket (low profile available)

Power & Environmental Requirements

   Volts: +3.3, +12
   Operating temperature: 0° to 55°C (32° to 131°F)
   Storage temperature: -40° to 70°C (-40° to 158°F)
   Relative humidity: 5% to 95% non-condensing
   23 degree C wet bulb

Agency Approvals

   Class 1 Laser Product per DHHS 21CFR (J) and EN60825-1
   UL recognized to UL 60950-1
   CUR recognized to CSA22.2, No. 60950-1-03
   Baurt-certified to EN60950-1
   FCC Rules, Part 15, Class A
   ICES-003, Class A
   EMC Directive 2004/108/EEC (CE Mark)
       EN55022, Class A
       EN55024
   Australian EMC Framework (C-Tick Mark)
       AS/NZS CISPR22, Class A
   VCCI (Japan), Class A
   MIC (Korea), Class A
   BSMI (Taiwan), Class A
   EU RoHS Compliant (Directive 2002/95/EC)
   China RoHS Compliant